Aerial Triangulation blocks export into Inpho Software supported format. Exterior Orientation (Adjusted photo coordinates) display in the Aerial triangulation report itself

Can iTwin do that? https://support.pix4d.com/hc/en-us/articles/202559889

Often happens the Engine is not running and when reaching to AT, we get a warning message as the attached picture shows. Adding a shortcut button in both areas as START ENGINE, rather than going to find and start engine separately can save time.

GLB is a open standard that's even in Windows supported.

Provide output from feature detection to PDF. Export from Microstation to PDF doesn't provide great results as textures are lost.

When building wall and roofs have holes or come our bumby. Allow the user to draw polygons on the 3D model (3SM) in the Reference model Window, across all tiles, to fix the holes and create the plane contraints without needing to export to Microst...

When production is finished it is showing the "Processing time". The value is only showing the last session of the engine for that production - not the total processing time. Please change it to be "Total Processing Time". It should show the proce...

Do not clear measurements when changing from location to distance measurements. For example when measuring less dense point clouds there is need to measure middle point between to get more accurate measurement on target.

Add additional colorization for 3D mesh by height. It is needed to smooth out any bumps on the ground for roads or other surfaces. Shading or colorization by orientation doesn't show lows or highs.

FLIR cameras or other thermal imaging systems can provide visuals and insights from subsurface in concrete bridges where delimnations and spalls are hiddent as an innovative solution replacing old fashion chain dragging. a dual RGB+Thermal images ...